---
Type: generic
ID: com.github.lancos.ponyprog
Package: ponyprog
ProjectLicense: GPL-2.0+
Name:
C: PonyProg
Summary:
C: Serial device programmer
Description:
C: |-
<p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows
and Linux. It's purpose is reading and writing every serial device. With PonyProg and SI-Prog you can
program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost
starter kit for PIC and AVR.</p>
<p>PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S
micro and SDE2506 eeprom family chips.</p>
<p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even
backup the old program on the chip using PonyProg. PonyProg enables the user to write, verify and erase
data on the microchip.</p>
<p>Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file
or eep file, BIN file to HEX file or MOT file and vice versa so you can use PonyProg as converter too.
PonyProg offers serial or parallel port programming for uC's. You can even change polarity of control
lines without touching the wires using I/O port setup.</p>
<p>Using PonyProg together with generic USB2serial based on FTDI adapters will work. There are plans
on upstream to use libusb to add more USB2serial based functionality.</p>
de: |-
<p>PonyProg ist eine Programmiersoftware für serielle Geräte mit einer benutzerfreundlichen Bedienoberfläche
für Windows und Linux. Die Aufgabe von PonyProg ist das Lesen und Schreiben von seriellen Programmiergeräten.
Mit PonyProg und SI-Prog können Sie Wafer-/Smartcards für SAT, EEPROMs innerhalb von GSM, TV oder Autoradios
bearbeiten. Darüber hinaus kann es als kostengünstiges Starter Kit für PIC und AVR Programmierungen verwendet
werden.</p>
<p>PonyProg unterstützt AVR, SPI EEPROMs, AVR micro, I2C-Bus 8Bit EEPROMs, PIC 16 micro, PIC 12 micro,
AT89S und EEPROMs der SDE2506 Familie.</p>
<p>Sie können jede Datei vom Typ *.HEX, *.e2p, *.mot, *.csm, *.rom, *.eep oder *.bin öffnen und diese
in Ihren µC oder PIC schreiben. Sie können auch ein Backup der alten Programmierung des Chips mit PonyProg
erstellen. PonyProg ermöglicht es dem Benutzer aber auch nach dem Schreiben der Programmierung die Daten
zu verifizieren, oder wenn gewünscht die Daten im Chip zu löschen.</p>
<p>Auch ist das Ändern von Fuse und Lock Bits möglich. Sie können jede Datei vom Typ HEX in die Typen
BIN oder eep, BIN in die Typen HEX oder MOT und umgekehrt umwandeln, Sie können PonyProg also auch zum
Umwandeln von Dateitypen verwenden. PoynProg bietet Unterstützung zur Programmierung von µC's per seriellen
oder parallel Port. Sie können sogar die Polarität der Steuerung ändern ohne das E/A-Port Setup der elektrischen
Leitungen zu verändern.</p>
<p>Die Benutzung von PonyProg zusammen mit einem generischen USB2Serial Adapter basierend auf FTDI Chipsatz
ist möglich. Es gibt Pläne durch die Benutzung der Bibliothek libusb die Benutzung von weiteren USB2Serial
Adaptern zu ermöglichen.</p>
Url:
homepage: https://www.lancos.com/
bugtracker: https://github.com/lancos/ponyprog/issues
Provides:
modaliases:
- usb:v1A86p5523d*
- usb:v1A86p7523d*
- usb:v1A86p5512d*
- usb:v0403p6E38d*
---
Type: desktop-application
ID: ponyprog.desktop
Package: ponyprog
Name:
C: Ponyprog
Summary:
C: EEPROM and microcontroller flasher
Description:
fr: |-
<p>PonyProg est un programmateur de périphériques série incluant une interface utilisateur conviviale
pour Windows et Linux. Son but est la lecture et l'écriture sur n'importe quel périphérique
série. Avec PonyProg et SI-Prog, vous pouvez programmer Wafercard pour SAT, une EEPROM dans un téléphone
mobile GSM, une télé ou une CAR-RADIO. De plus, vous pouvez l'utiliser comme une boîte à outils
à bas coût pour vous lancer dans PIC et AVR. PonyProg gère les puces des familles AVR, EEPROM SPI, AVR
micro, EEPROM 8 bits avec bus I2C, PIC 16 micro, PIC 12 micro, AT89S micro et EEPROM SDE2506. Vous pouvez
ouvrir n'importe quel fichier HEX, e2p, mot, csm, rom, eep, bin et les graver sur un microcontrôleur
ou un PIC. Vous pouvez même sauvegarder l'ancien programme de la puce en utilisant PonyProg. PonyProg
permet à l'utilisateur d'écrire, de vérifier et d'écraser les données d'une micropuce.
Il est aussi possible de définir les « fuse bits » et les verrous en utilisant PonyProg. Vous pouvez
enregistrer n'importe quel fichier HEX en un fichier BIN ou eep, un fichier BIN en HEX ou MOT et
vice versa, vous pouvez donc également utiliser PonyProg comme convertisseur. PonyProg permet la programmation
d'un port série ou parallèle pour les microcontrôleurs. Vous pouvez même modifier la polarité des
lignes de contrôle sans toucher aux fils, en utilisant le réglage des ports E/S. L'utilisation de
PonyProg avec des adaptateurs génériques USB2serial basés sur des adaptateurs FTDI est possible. Des
projets en amont visent à utiliser libusb pour ajouter plus de fonctionnalités basées sur USB2serial.</p>
da: |-
<p>PonyProg er et serielt enhedsprogrammørprogram med en brugervenlig grafisk brugerfladeramme tilgængelig
for Windows og Linux. Dets formål er at læse og skrive enhver seriel enhed. Med PonyProg og SI-prog kan
du programmere Wafercard for SAT, eeprom med GSM; TV eller CAR-RADIO. Derudover kan programmet bruges
som et opstartssæt med lav pris for PIC og AVR. Ponyprog understøtter chip i familierne AVR, SPI eeprom,
AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro og SDE2506. Du kan åbne enhver
af de følgende filformater HEX, e2p, mot, csm, rom, eep og bin og brænde dem til uC eller PIC. Du kan
endda lave sikkerhedskopier af det gamle program på chippen via Ponyprog. Ponyprog gør det muligt for
brugeren at skrive, verificere og slette data på mikrochippen. Det er også muligt at angive fuse bit
og låse via Ponyprog. Du kan gemme enhver HEX-fil til BIN-fil eller eep-fil, BIN-fil til HEX-fil eller
MOT-fil og omvendt, så du kan også bruge Ponyprog som konverteringsprogram. Ponyprog tilbyder seriel
eller parallel portprogrammering for uC'er. Du kan endda ændre polaritet for kontrollinjer uden
at røre ledningerne via I/O-portopsætning. Brug af Ponyprog sammen med generiske USB2-serielt baserede
FTDI-adaptere vil fungere. Der er planer opstrøms om at bruge libusb til at tilføje yderligere USB2-serial-baseret
funktionalitet.</p>
it: |-
<p>PonyProg è un software per programmatore di dispositivi seriali con un'infrastruttura con GUI
amichevole disponibile per Windows e Linux. Il suo scopo è quello di leggere e scrivere su ogni dispositivo
seriale. Con PonyProg e SI-Prog si può programmare Wafercard per SAT, eeprom all'interno di GSM,
TV o CAR-RADIO. Inoltre può essere utilizzato come kit iniziale a basso costo per PIC e AVR. PonyProg
gestisce chip delle famiglie AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro,
AT89S micro e SDE2506 eeprom. Si può aprire qualsiasi file HEX, e2p, mot, csm, rom, eep, bin e masterizzarlo
su uC o PIC. Usando PonyProg si può persino fare il backup del vecchio programma sul chip. PonyProg permette
all'utente di scrivere, verificare e cancellare dati sul microchip. Con PonyProg è anche possibile
impostare bit e blocchi FUSE. Si può salvare qualsiasi file HEX in file BIN o eep, file BIN in file HEX
o MOT e viceversa, perciò PonyProg può anche essere utilizzato come convertitore. PonyProg offre programmazione
su porta seriale o parallela per uC. Si può anche modificare la polarità delle linee di controllo senza
toccare i cavi usando le impostazioni della porta di I/O. Usare PonyProg insieme con adattatori USB2serial
generici basati su adattatori FTDI funziona. Gli autori originali hanno in programma di usare libusb
per aggiungere altre funzionalità basate su USB2serial.</p>
en: |-
<p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows
and Linux. It's purpose is reading and writing every serial device. With PonyProg and SI-Prog you
can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low
cost starter kit for PIC and AVR. PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom,
PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips. You can open any HEX, e2p, mot,
csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program on the chip
using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip. Also setting
fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN
file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers
serial or parallel port programming for uC's. You can even change polarity of control lines without
touching the wires using I/O port setup. Using PonyProg together with generic USB2serial based on FTDI
adapters will work. There are plans on upstream to use libusb to add more USB2serial based functionality.</p>
C: |-
<p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows
and Linux. It's purpose is reading and writing every serial device. With PonyProg and SI-Prog you
can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low
cost starter kit for PIC and AVR. PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom,
PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips. You can open any HEX, e2p, mot,
csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program on the chip
using PonyProg. PonyProg enables the user to write, verify and erase data on the microchip. Also setting
fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep file, BIN
file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers
serial or parallel port programming for uC's. You can even change polarity of control lines without
touching the wires using I/O port setup. Using PonyProg together with generic USB2serial based on FTDI
adapters will work. There are plans on upstream to use libusb to add more USB2serial based functionality.</p>
Categories:
- Utility
Keywords:
C:
- Electronics,Eeprom
Icon:
cached:
- name: ponyprog_ponyprog.jxl
width: 48
height: 48
- name: ponyprog_ponyprog.jxl
width: 64
height: 64
- name: ponyprog_ponyprog.jxl
width: 128
height: 128
remote:
- url: p/po/ponyprog.desktop/07e89e9968988f2a96de68d40ee60925/icons/128x128/ponyprog_ponyprog.jxl
width: 128
height: 128
stock: ponyprog
Launchable:
desktop-id:
- ponyprog.desktop
