---
Type: generic
ID: com.github.lancos.ponyprog
Package: ponyprog
ProjectLicense: GPL-2.0+
Name:
C: PonyProg
Summary:
C: Serial device programmer
Description:
C: >-
<p>PonyProg is a serial device programmer software with a user
friendly GUI framework available for Windows and Linux. It's
purpose is reading and writing every serial device. With PonyProg
and SI-Prog you can program Wafercard for SAT, eeprom within GSM,
TV or CAR-RADIO. Furthermore it can be used as a low cost starter
kit for PIC and AVR.</p>
<p>PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit
eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom
family chips.</p>
<p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and
burn them to uC or PIC. You can even backup the old program on the
chip using PonyProg. PonyProg enables the user to write, verify
and erase data on the microchip.</p>
<p>Also setting fuse bits and locks using PonyProg is
possible. You can save any HEX file to BIN file or eep file, BIN
file to HEX file or MOT file and vice versa so you can use
PonyProg as converter too. PonyProg offers serial or parallel port
programming for uC's. You can even change polarity of control
lines without touching the wires using I/O port setup.</p>
<p>Using PonyProg together with generic USB2serial based on FTDI adapters
will work. There are plans on upstream to use libusb to add more USB2serial
based functionality.</p>
de: >-
<p>PonyProg ist eine Programmiersoftware für serielle Geräte
mit einer benutzerfreundlichen Bedienoberfläche für Windows und Linux.
Die Aufgabe von PonyProg ist das Lesen und Schreiben von seriellen
Programmiergeräten. Mit PonyProg und SI-Prog können Sie Wafer-/Smartcards
für SAT, EEPROMs innerhalb von GSM, TV oder Autoradios bearbeiten.
Darüber hinaus kann es als kostengünstiges Starter Kit für PIC und AVR
Programmierungen verwendet werden.</p>
<p>PonyProg unterstützt AVR, SPI EEPROMs, AVR micro,
I2C-Bus 8Bit EEPROMs, PIC 16 micro, PIC 12 micro, AT89S und EEPROMs der
SDE2506 Familie.</p>
<p>Sie können jede Datei vom Typ *.HEX, *.e2p, *.mot,
*.csm, *.rom, *.eep oder *.bin öffnen und diese in Ihren µC oder PIC
schreiben. Sie können auch ein Backup der alten Programmierung des Chips
mit PonyProg erstellen. PonyProg ermöglicht es dem Benutzer aber auch
nach dem Schreiben der Programmierung die Daten zu verifizieren, oder
wenn gewünscht die Daten im Chip zu löschen.</p>
<p>Auch ist das Ändern von Fuse und Lock Bits möglich.
Sie können jede Datei vom Typ HEX in die Typen BIN oder eep, BIN in die
Typen HEX oder MOT und umgekehrt umwandeln, Sie können PonyProg also
auch zum Umwandeln von Dateitypen verwenden. PoynProg bietet Unterstützung
zur Programmierung von µC's per seriellen oder parallel Port. Sie können
sogar die Polarität der Steuerung ändern ohne das E/A-Port Setup der
elektrischen Leitungen zu verändern.</p>
<p>Die Benutzung von PonyProg zusammen mit einem generischen
USB2Serial Adapter basierend auf FTDI Chipsatz ist möglich. Es gibt Pläne
durch die Benutzung der Bibliothek libusb die Benutzung von weiteren
USB2Serial Adaptern zu ermöglichen.</p>
Url:
homepage: https://www.lancos.com/
bugtracker: https://github.com/lancos/ponyprog/issues
Provides:
modaliases:
- usb:v1A86p5523d*
- usb:v1A86p7523d*
- usb:v1A86p5512d*
- usb:v0403p6E38d*
---
Type: desktop-application
ID: ponyprog.desktop
Package: ponyprog
Name:
C: Ponyprog
Summary:
C: EEPROM and microcontroller flasher
Description:
fr: >-
<p>PonyProg est un programmateur de périphériques série incluant une interface utilisateur conviviale pour Windows et Linux. Son but est
la lecture et l'écriture sur n'importe quel périphérique série. Avec PonyProg et SI-Prog, vous pouvez programmer Wafercard pour
SAT, une EEPROM dans un téléphone mobile GSM, une télé ou une CAR-RADIO. De plus, vous pouvez l'utiliser comme une boîte à outils
à bas coût pour vous lancer dans PIC et AVR. PonyProg gère les puces des familles AVR, EEPROM SPI, AVR micro, EEPROM 8 bits avec bus
I2C, PIC 16 micro, PIC 12 micro, AT89S micro et EEPROM SDE2506. Vous pouvez ouvrir n'importe quel fichier HEX, e2p, mot, csm, rom,
eep, bin et les graver sur un microcontrôleur ou un PIC. Vous pouvez même sauvegarder l'ancien programme de la puce en utilisant
PonyProg. PonyProg permet à l'utilisateur d'écrire, de vérifier et d'écraser les données d'une micropuce. Il est
aussi possible de définir les « fuse bits » et les verrous en utilisant PonyProg. Vous pouvez enregistrer n'importe quel fichier
HEX en un fichier BIN ou eep, un fichier BIN en HEX ou MOT et vice versa, vous pouvez donc également utiliser PonyProg comme convertisseur.
PonyProg permet la programmation d'un port série ou parallèle pour les microcontrôleurs. Vous pouvez même modifier la polarité des
lignes de contrôle sans toucher aux fils, en utilisant le réglage des ports E/S. L'utilisation de PonyProg avec des adaptateurs
génériques USB2serial basés sur des adaptateurs FTDI est possible. Des projets en amont visent à utiliser libusb pour ajouter plus de
fonctionnalités basées sur USB2serial.</p>
da: >-
<p>PonyProg er et serielt enhedsprogrammørprogram med en brugervenlig grafisk brugerfladeramme tilgængelig for Windows og Linux. Dets
formål er at læse og skrive enhver seriel enhed. Med PonyProg og SI-prog kan du programmere Wafercard for SAT, eeprom med GSM; TV eller
CAR-RADIO. Derudover kan programmet bruges som et opstartssæt med lav pris for PIC og AVR. Ponyprog understøtter chip i familierne AVR,
SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro og SDE2506. Du kan åbne enhver af de følgende filformater
HEX, e2p, mot, csm, rom, eep og bin og brænde dem til uC eller PIC. Du kan endda lave sikkerhedskopier af det gamle program på chippen
via Ponyprog. Ponyprog gør det muligt for brugeren at skrive, verificere og slette data på mikrochippen. Det er også muligt at angive
fuse bit og låse via Ponyprog. Du kan gemme enhver HEX-fil til BIN-fil eller eep-fil, BIN-fil til HEX-fil eller MOT-fil og omvendt, så
du kan også bruge Ponyprog som konverteringsprogram. Ponyprog tilbyder seriel eller parallel portprogrammering for uC'er. Du kan
endda ændre polaritet for kontrollinjer uden at røre ledningerne via I/O-portopsætning. Brug af Ponyprog sammen med generiske USB2-serielt
baserede FTDI-adaptere vil fungere. Der er planer opstrøms om at bruge libusb til at tilføje yderligere USB2-serial-baseret funktionalitet.</p>
it: >-
<p>PonyProg è un software per programmatore di dispositivi seriali con un'infrastruttura con GUI amichevole disponibile per Windows
e Linux. Il suo scopo è quello di leggere e scrivere su ogni dispositivo seriale. Con PonyProg e SI-Prog si può programmare Wafercard
per SAT, eeprom all'interno di GSM, TV o CAR-RADIO. Inoltre può essere utilizzato come kit iniziale a basso costo per PIC e AVR.
PonyProg gestisce chip delle famiglie AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro e SDE2506
eeprom. Si può aprire qualsiasi file HEX, e2p, mot, csm, rom, eep, bin e masterizzarlo su uC o PIC. Usando PonyProg si può persino fare
il backup del vecchio programma sul chip. PonyProg permette all'utente di scrivere, verificare e cancellare dati sul microchip.
Con PonyProg è anche possibile impostare bit e blocchi FUSE. Si può salvare qualsiasi file HEX in file BIN o eep, file BIN in file HEX
o MOT e viceversa, perciò PonyProg può anche essere utilizzato come convertitore. PonyProg offre programmazione su porta seriale o parallela
per uC. Si può anche modificare la polarità delle linee di controllo senza toccare i cavi usando le impostazioni della porta di I/O.
Usare PonyProg insieme con adattatori USB2serial generici basati su adattatori FTDI funziona. Gli autori originali hanno in programma
di usare libusb per aggiungere altre funzionalità basate su USB2serial.</p>
en: >-
<p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux. It's purpose
is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO.
Furthermore it can be used as a low cost starter kit for PIC and AVR. PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom,
PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips. You can open any HEX, e2p, mot, csm, rom, eep, bin files and
burn them to uC or PIC. You can even backup the old program on the chip using PonyProg. PonyProg enables the user to write, verify and
erase data on the microchip. Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep
file, BIN file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel port
programming for uC's. You can even change polarity of control lines without touching the wires using I/O port setup. Using PonyProg
together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use libusb to add more USB2serial based
functionality.</p>
C: >-
<p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux. It's purpose
is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO.
Furthermore it can be used as a low cost starter kit for PIC and AVR. PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom,
PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips. You can open any HEX, e2p, mot, csm, rom, eep, bin files and
burn them to uC or PIC. You can even backup the old program on the chip using PonyProg. PonyProg enables the user to write, verify and
erase data on the microchip. Also setting fuse bits and locks using PonyProg is possible. You can save any HEX file to BIN file or eep
file, BIN file to HEX file or MOT file and vice versa so you can use PonyProg as converter too. PonyProg offers serial or parallel port
programming for uC's. You can even change polarity of control lines without touching the wires using I/O port setup. Using PonyProg
together with generic USB2serial based on FTDI adapters will work. There are plans on upstream to use libusb to add more USB2serial based
functionality.</p>
Categories:
- Utility
Keywords:
C:
- Electronics,Eeprom
Icon:
cached:
- name: ponyprog_ponyprog.png
width: 48
height: 48
- name: ponyprog_ponyprog.png
width: 64
height: 64
- name: ponyprog_ponyprog.png
width: 128
height: 128
remote:
- url: p/po/ponyprog.desktop/07e89e9968988f2a96de68d40ee60925/icons/128x128/ponyprog_ponyprog.png
width: 128
height: 128
stock: ponyprog
Launchable:
desktop-id:
- ponyprog.desktop
