Metadata for ponyprog in main

---
Type: desktop-application
ID: ponyprog.desktop
Package: ponyprog
Name:
  C: Ponyprog
Summary:
  C: EEPROM and microcontroller flasher
Description:
  it: >-
    <p>PonyProg è un software per programmatore di dispositivi seriali con un&apos;infrastruttura con GUI amichevole disponibile
    per Windows e Linux. Il suo scopo è quello di leggere e scrivere su ogni dispositivo seriale. Con PonyProg e SI-Prog si
    può programmare Wafercard per SAT, eeprom all&apos;interno di GSM, TV o CAR-RADIO. Inoltre può essere utilizzato come
    kit iniziale a basso costo per PIC e AVR.</p>

    <p>PonyProg gestisce chip delle famiglie AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro,
    AT89S micro e SDE2506 eeprom.</p>

    <p>Si può aprire qualsiasi file HEX, e2p, mot, csm, rom, eep, bin e masterizzarlo su uC o PIC. Usando PonyProg si può
    persino fare il backup del vecchio programma sul chip. PonyProg permette all&apos;utente di scrivere, verificare e cancellare
    dati sul microchip.</p>

    <p>Con PonyProg è anche possibile impostare bit e blocchi FUSE. Si può salvare qualsiasi file HEX in file BIN o eep, file
    BIN in file HEX o MOT e viceversa, perciò PonyProg può anche essere utilizzato come convertitore. PonyProg offre programmazione
    su porta seriale o parallela per uC. Si può anche modificare la polarità delle linee di controllo senza toccare i cavi
    usando le impostazioni della porta di I/O.</p>

    <p>Attualmente non è possibile usare PonyProg insieme con adattatori USB2serial generici! Gli autori originali hanno in
    programma di usare libusb per aggiungere tale funzionalità.</p>
  fr: >-
    <p>PonyProg est un programmateur de périphériques série incluant une interface utilisateur conviviale pour Windows et
    Linux. Son but est la lecture et l&apos;écriture sur n&apos;importe quel périphérique série. Avec PonyProg et SI-Prog,
    vous pouvez programmer Wafercard pour SAT, une eeprom dans un téléphone mobile GSM, une télé ou une CAR-RADIO. De plus,
    vous pouvez l&apos;utiliser comme une boîte à outils à bas coût pour vous lancer dans PIC et AVR.</p>

    <p>Ponyprog gère les puces de la famille AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro,
    AT89S micro et SDE2506.</p>

    <p>Vous pouvez ouvrir n&apos;importe quel fichier HEX, e2p, mot, csm, rom, eep, bin et les graver sur un microcontrôleur
    ou un PIC. Vous pouvez même sauvegarder l&apos;ancien programme de la puce en utilisant Ponyprog. Ponyprog permet à l&apos;utilisateur
    d&apos;écrire, de vérifier et d&apos;écraser les données d&apos;une micropuce.</p>

    <p>Il est aussi possible de définir les «⋅fuse bits⋅» et les verrous en utilisant Ponyprog. Vous pouvez enregistrer n&apos;importe
    quel fichier HEX en un fichier BIN ou eep, un fichier BIN en HEX ou MOT et vice versa, vous pouvez donc également utiliser
    Ponyprog comme convertisseur. Ponyprog permet la programmation d&apos;un port série ou parallèle pour les microcontrôleurs.
    Vous pouvez même modifier la polarité des lignes de contrôle sans toucher aux fils, en utilisant le réglage des ports
    E/S.</p>

    <p>L&apos;utilisation de Ponyprog avec des adaptateurs génériques USB2serial n&apos;est pas possible actuellement ! Des
    projets en amont visent à utiliser libusb pour ajouter cette fonctionnalité.</p>
  C: >-
    <p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux.
    It&apos;s purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for
    SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.</p>

    <p>Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506
    eeprom family chips.</p>

    <p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program
    on the chip using Ponyprog. Ponyprog enables the user to write, verify and erase data on the microchip.</p>

    <p>Also setting fuse bits and locks using Ponyprog is possible. You can save any HEX file to BIN file or eep file, BIN
    file to HEX file or MOT file and vice versa so you can use Ponyprog as converter too. Ponyprog offers serial or parallel
    port programming for uC&apos;s. You can even change polarity of control lines without touching the wires using I/O port
    setup.</p>

    <p>Using Ponyprog together with generic USB2serial adapters is currently not possible! There are plans on upstream to
    use libusb to add such functionality.</p>
  da: >-
    <p>PonyProg er et serielt enhedsprogrammørprogram med en brugervenlig grafisk brugerfladeramme tilgængelig for Windows
    og Linux. Dets formål er at læse og skrive enhver seriel enhed. Med PonyProg og SI-prog kan du programmere Wafercard for
    SAT, eeprom med GSM; TV eller CAR-RADIO. Derudover kan programmet bruges som et opstartssæt med lav pris for PIC og AVR.</p>

    <p>Ponyprog understøtter chip i familierne AVR, SPI eeprom, AVR micro, 2C bus 8bit eeprom, PIC 16 micro, PIC 12 micro,
    AT89S micro og SDE2506 eeprom.</p>

    <p>Du kan åbne enhver af de følgende filformater HEX, e2p, mot, csm, rom, eep og bin og brænde dem til uC eller PIC. Du
    kan endda lave sikkerhedskopier af det gamle program på chippen via Ponyprog. Ponyprog gør det muligt for brugeren at
    skrive, verificere og slette data på mikrochippen.</p>

    <p>Det er også muligt at angive fuse bit og låse via Ponyprog. Du kan gemme enhver HEX-fil til BIN-fil eller eep-fil,
    BIN-fil til HEX-fil eller MoT-fil og omvendt, så du kan også bruge Ponyprog som konverteringsprogram. Ponyprog tilbyder
    seriel eller parallel portprogrammering for uC&apos;er. Du kan endda ændre polaritet for kontrollinjer uden at røre ledningerne
    via I/O-portopsætning.</p>

    <p>Brug af Ponyprog sammen med generiske USB2-serielle adaptere er i øjeblikket ikke muligt! Der er planer opstrøms om
    at bruge libusb til at tilføje en sådan funktionalitet.</p>
  en: >-
    <p>PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows and Linux.
    It&apos;s purpose is reading and writing every serial device. With PonyProg and SI-Prog you can program Wafercard for
    SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.</p>

    <p>Ponyprog supports AVR, SPI eeprom, AVR micro, 12C bus 8bit eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506
    eeprom family chips.</p>

    <p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them to uC or PIC. You can even backup the old program
    on the chip using Ponyprog. Ponyprog enables the user to write, verify and erase data on the microchip.</p>

    <p>Also setting fuse bits and locks using Ponyprog is possible. You can save any HEX file to BIN file or eep file, BIN
    file to HEX file or MOT file and vice versa so you can use Ponyprog as converter too. Ponyprog offers serial or parallel
    port programming for uC&apos;s. You can even change polarity of control lines without touching the wires using I/O port
    setup.</p>

    <p>Using Ponyprog together with generic USB2serial adapters is currently not possible! There are plans on upstream to
    use libusb to add such functionality.</p>
Categories:
- Utility
Keywords:
  C:
  - Electronics,Eeprom
Icon:
  cached:
  - name: ponyprog_ponyprog.png
    width: 48
    height: 48
  - name: ponyprog_ponyprog.png
    width: 64
    height: 64
  - name: ponyprog_ponyprog.png
    width: 128
    height: 128
  remote:
  - url: p/po/ponyprog.desktop/07e89e9968988f2a96de68d40ee60925/icons/128x128/ponyprog_ponyprog.png
    width: 128
    height: 128
  stock: ponyprog
Launchable:
  desktop-id:
  - ponyprog.desktop

---
Type: generic
ID: com.github.lancos.ponyprog
Package: ponyprog
ProjectLicense: GPL-2.0+
Name:
  C: PonyProg
Summary:
  C: Serial device programmer
Description:
  C: >-
    <p>PonyProg is a serial device programmer software with a user
        friendly GUI framework available for Windows and Linux. It's
        purpose is reading and writing every serial device. With PonyProg
        and SI-Prog you can program Wafercard for SAT, eeprom within GSM,
        TV or CAR-RADIO. Furthermore it can be used as a low cost starter
        kit for PIC and AVR.</p>
    <p>PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit
        eeprom, PIC 16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom
        family chips.</p>
    <p>You can open any HEX, e2p, mot, csm, rom, eep, bin files and
        burn them to uC or PIC. You can even backup the old program on the
        chip using PonyProg. PonyProg enables the user to write, verify
        and erase data on the microchip.</p>
    <p>Also setting fuse bits and locks using PonyProg is
        possible. You can save any HEX file to BIN file or eep file, BIN
        file to HEX file or MOT file and vice versa so you can use
        PonyProg as converter too. PonyProg offers serial or parallel port
        programming for uC's. You can even change polarity of control
        lines without touching the wires using I/O port setup.</p>
    <p>Using PonyProg together with generic USB2serial based on FTDI adapters
        will work. There are plans on upstream to use libusb to add more USB2serial
        based functionality.</p>
  de: >-
    <p>PonyProg ist eine Programmiersoftware für serielle Geräte
        mit einer benutzerfreundlichen Bedienoberfläche für Windows und Linux.
        Die Aufgabe von PonyProg ist das Lesen und Schreiben von seriellen
        Programmiergeräten. Mit PonyProg und SI-Prog können Sie Wafer-/Smartcards
        für SAT, EEPROMs innerhalb von GSM, TV oder Autoradios bearbeiten.
        Darüber hinaus kann es als kostengünstiges Starter Kit für PIC und AVR
        Programmierungen verwendet werden.</p>
    <p>PonyProg unterstützt AVR, SPI EEPROMs, AVR micro,
        I2C-Bus 8Bit EEPROMs, PIC 16 micro, PIC 12 micro, AT89S und EEPROMs der
        SDE2506 Familie.</p>
    <p>Sie können jede Datei vom Typ *.HEX, *.e2p, *.mot,
        *.csm, *.rom, *.eep oder *.bin öffnen und diese in Ihren µC oder PIC
        schreiben. Sie können auch ein Backup der alten Programmierung des Chips
        mit PonyProg erstellen. PonyProg ermöglicht es dem Benutzer aber auch
        nach dem Schreiben der Programmierung die Daten zu verifizieren, oder
        wenn gewünscht die Daten im Chip zu löschen.</p>
    <p>Auch ist das Ändern von Fuse und Lock Bits möglich.
        Sie können jede Datei vom Typ HEX in die Typen BIN oder eep, BIN in die
        Typen HEX oder MOT und umgekehrt umwandeln, Sie können PonyProg also
        auch zum Umwandeln von Dateitypen verwenden. PoynProg bietet Unterstützung
        zur Programmierung von µC's per seriellen oder parallel Port. Sie können
        sogar die Polarität der Steuerung ändern ohne das E/A-Port Setup der
        elektrischen Leitungen zu verändern.</p>
    <p>Die Benutzung von PonyProg zusammen mit einem generischen
        USB2Serial Adapter basierend auf FTDI Chipsatz ist möglich. Es gibt Pläne
        durch die Benutzung der Bibliothek libusb die Benutzung von weiteren
        USB2Serial Adaptern zu ermöglichen.</p>
Url:
  homepage: https://www.lancos.com/
  bugtracker: https://github.com/lancos/ponyprog/issues
Provides:
  modaliases:
  - usb:v1A86p5523d*
  - usb:v1A86p7523d*
  - usb:v1A86p5512d*
  - usb:v0403p6E38d*